Pressed Stainless Steel Sectional Water Tank

GENERAL SPECIFICATIONS

Standard :
PIPECO pressed steel sectional water tank constructed with hydraulically pressed flanged panels,SS 304 & 316
Materials :
The tank panel, tie rods, stays and cleats are made from Stainless Steel Grade 304/316

Flanges of Plates :
Tank panels pressed with a 90 degree panel flange to the face of the plate on four sides

Bolts, Nuts and Washers :
SS304/316 bolts, nuts and washer

Jointing Materials :
Non toxic PVC foam to be used for all jointing between tank panel flange

Tank Cover :
Panel type tank cover supported by trusses
600mm x 600mm square manhole and supplied as standard for each compartment

Water Level Indicator :
Standard:Reversed Reading Mechanical type with Cat & Mouse
Optional: Direct Reading Clear Tube Type

Nozzels for Connection :
Short pipe with flange or socket for all pipe connections

Ladder :
Internal ladder shall be made of SS304/316 and aluminium for external ladder

Skid Base:
HDG C-Channels.

Standard Thickness for 1.22m x 1.22m Tank Panel

Type 1.22m (H) 2.44m (H) 3.66m (H) 4.88m (H)
Top Panels 1.5mm 1.5mm 1.5mm 1.5mm
4th side panels     2.5mm
3rd side panels     2.5mm 2.5mm
2nd side panels   2.5mm 3.0mm 3.0mm
1st side panels 2.5mm 2.5mm 4.0mm 4.0mm
Bottom panels 2.5mm 2.5mm 4.0mm 4.0mm

Standard Thickness for 1.0m x 1.0m Tank Panel

Type 1.0m (H) 1.5m (H) 2.0m (H) 2.5m (H) 3.0m (H) 3.5m (H) 4.0m (H)
Top panels 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm
4th side panels          
3rd side panels           2mm(1×1.5m) 2mm(1x2m)
2nd side panels       2mm(1×1.5m) 2mm(1x2m) 2.5mm 3.0mm
1st side panels 2.0mm 2mm(1×1.5m) 2mm(1x2m) 2.5mm 2.5mm 3.0mm 4.0mm
Bottom panels 2.0mm 2.0mm 2.0mm 2.5mm 3.0mm 4.0mm 4.0mm