GENERAL SPECIFICATIONS

Standard:
PIPECO pressed steel sectional water tank constructed with hydraulically pressed flanged panels, conform to BS 1564 : 1975 and SS 22 : 1979

Flanges of Plates :
The tank plates are pressed with a combined double flange at an angle of 45 degree and 90 degree to the face of the plate on four sides 

Stays and Cleats :
The stays and cleats are made of steel angle bar and steel plate

Bolts, Nuts and Washers:
Hot Dipped Galvanised steel bolts, nuts and washers for internal and external.    

Jointing Materials :
Non toxic PVC foam to be used for all jointing between tank panel flange   

Tank Cover :
Panel type tank cover supported by trusses and poles 600 x 600 square manhole and 100mm air-vent supplied as standard for each compartment

Water Level Indicator :
Mechanical  Ball Float Type    

Ladder :
Alumninium ladder for internal and external          

Finish :
(a) Hot Dip Galvanised conform to BS 729 or ISO equivalent
(b) Black Bituminous Coated

 

Standard Thickness for 1.22m x 1.22m Tank Panel

Type 1.22m (H) 2.44m (H) 3.66m (H) 4.88m (H) 4th side panels 5mm 3rd side panels 5mm 5mm 2nd side panels 5mm 5mm 5mm 1st side panels 5mm 5mm 5mm 5mm Bottom panels 5mm 5mm 5mm 5mm

Standard Thickness for 1m x 1m Tank Panel

Type 1.0m (H) 2.0 (H) 3.0m (H) 4.0m (H) 5.0m (H) 5th side panels 5mm 4th side panels 5mm 5mm 3rd side panels 5mm 5mm 5mm 2nd side panels 5mm 5mm 5mm 5mm 1st side panels 5mm 5mm 5mm 5mm 5mm Bottom panels 5mm 5mm 5mm 5mm 5mm